2WD Light Tks 4 Cyl

2012 2WD Light TRUCK SERIES RULES

ENGINE:

Class must be Four cylinders only, No crankshaft and rod modifications, factory OEM ONLY)

Engine must be in factory location

Carburetor limited to two barrels, EFI must be factory OEM     

Must have factory intake or aftermarket replacement intake that fits factory OEM head only.  No custom fabricated intakes allowed

 

Factory head only, may be modified internally ,

Aftermarket camshaft allowed

Block must be OEM, Boring allowed

Exhaust may be altered

Must run pump fuel only, No nitrous/propane  No Alcohol

 

TRANSMISSION:

Factory OEM 2wd only (No 4X4 trans/transfer case)

 Must have explosion Proof Blanket \ Shield with reinforced floor using a mininmum of 1/8" Steel .

CHASIS:

Factory OEM only

May change differential, (must be ½ ton mounted with springs (Portable blocking allowed. (NO 1 ton or larger differentials)

 Drive Shaft Loops Required, 1/4" Think  ,6" width placed in front and rear that covers U joints ,1" width in center. May be constructed with 1/4" Steel or 3/8" aluminum.

 3000lb weight limit including driver

HITCH:

Maximum height, 20 inches and not to exceed height of factory OEM bumper hitch point

Bumper bars required to eliminate contact from sled

Must have 1 3/4” minimum hole

 

TIRES:

DOT/Bar tread only, not to exceed 26” height, no width limitation 

Chevron puller tires not allowed (cepek, pitbull etc.)

 

3000lb Light Truck Safety Requirements

Drivers under the age of 16 must be accompanied by parent/guardian in vehicle at all times in pit, weigh in and staging.

 Child may drive onto track and back to sled with parent along side of vehicle until sled is safely hooked to vehicle

Parent/guardian must drive vehicle off track after child has completed pull

Helmet, seat belts required for all drivers

Working kill switch on all vehicles

Fire extinguisher required on all vehicles, easily accessible

Fuel tanks/cells must be secured to vehicle

Vehicles must be operated in safe manner at all times